Set up in 2 minutes
No electrician, no tools and nothing inside the AC. Just follow these 6 steps.
Watch the 47-second video, or follow the steps below.
In the box
Airconet controller and a USB cable.
You need
A USB phone charger, 2.4 GHz home Wi-Fi and your AC remote.
The app
Free on Google Play (App Store coming soon). One account for the app, the web dashboard and Alexa.
Find the right spot
Put the Airconet on a shelf or table near your AC, where you would point the remote. It needs a clear line of sight to the AC – about 1 to 5 meters away. Plug it in with the USB cable.
Check the blue light
Your new Airconet is ready for setup out of the box – no button to press. When it is plugged in, the blue light blinks fast. Now it is ready to join your Wi-Fi.
Open the Airconet app
Install the Airconet app, log in or create an account, then tap + Add device. Your phone must be on your home Wi-Fi (2.4 GHz).
Enter your Wi-Fi password
Type your Wi-Fi password and tap Start. All blinking Airconets are found together – choose the ones you want to add.
Teach your AC
When the light is steady, point your AC remote at the Airconet and press any button once. Airconet learns your AC brand by itself.
Name your rooms – done!
Give each AC a name like “Bedroom” or “Living room”. Now you can control it from the app, the web dashboard or by voice with Alexa.
Something not working?
The app says “No Airconet was found”
Check that the blue light blinks fast, that your phone is on the 2.4 GHz Wi-Fi and that the Wi-Fi password is right. Move the Airconet closer to the router and try again.
The AC does not react
The Airconet sends the same signal as your remote, so it must “see” the AC. Turn it to face the AC and remove anything in between. Then restart the Airconet (unplug it and plug it in again) and press any button on your AC remote, pointed at it, so it learns your AC model again.
I changed my Wi-Fi or password
First remove the device from the app. Then add it again with + Add device and your new Wi-Fi name and password.