ECOsense Energy Save Motion Sensor
Save Energy by Automatically and Wirelessly Power off Air-Condition (and TV) when room is left empty
Cut Energy bills by up to 20%
Learning IR Remote Control codes (up to 2 infrared codes)
Automatically Turns Off Air-Condition when room is left empty
Preset delay time (15, 30 or 60 min) before power off
DIY - No need wires or complex installation (works with 2 AAA)
Totally wireless, simply fix on wall or ceiling
Low-Cost device with High-Savings
Spec Motion Sensor (energy saver)
0.59" (1.5cm) deep
-
Voltage: 3VDC (2* AAA batteries)
-
Size: 2.36” * 2.36” * 0.59” (60 * 60 * 15 mm)
-
Motion sensor: High sensuality Dual Element PIR
-
Detecting range: 20ft (6m) max. at 3600
-
IR transmitting range: 20ft (6m) max.
-
IR transmitting direction: one in front and one on side
-
IR learning code: 2 IR commands (i.e. AirCon and TV)
-
Memory: IR codes are stored in Flash memory – also without batteries
-
Timer select by slide switch: 15, 30 or 60 minutes
-
Onboard Switch can turn off devices manually
-
Mounting: optional Ceiling or Wall with screws or sticker
-
Works with IR devices that has discrete OFF command (can work only with remote control that has LCD)
-
Not suitable for room with moving objects (pets, curtains in wind, etc.)
-
Include in box: ECOsense device, 2 AAA batteries and Manual
-
No wire or installation required
-
Long lasting battery life (normally over 6 month)
-
Indoor use only
-
Certification: FCC, CE, IC, EMC, LVD
-
Warranty: 1 year limited
How it works
When room is left empty, the ECOsense start to countdown the preset time (15 or 30 or 60 minutes). Once it reach the delay time, it will automatically send 'OFF' command to power off the air condition
